+ More

The official site for "Project Accessory" Season 1 offers video, designer information, Rate the Runway photos, blogs and more.

project-accessory-blog

The Project Accessory Blog

Category: "DIY"

10
THU

Laura Bennett DIY: Episode 3 – Christina's Crystal Earrings

Posted By CaitlinBergmann 5:49pm GMT

Laura Bennett DIY earrings

Materials
6 Swarovski 26 X 8.5mm Sew-On Crystals, style 39337 6 large jump rings
2 small jump rings
1 pair earring wires

Tools
Needle nose pliers

1. Using a pair of needle nose pliers, pry open the large jump rings and form two chains of three stones each.

Laura Bennett DIY earrings

2. Using the small jump rings, attach the earring wires to the top jump ring of each chain of stones.

Laura Bennett DIY earrings

3. Collect your prize for creating a winning accessory (pictured below: orginal on the left, my DIY on the right).


Laura Bennett DIY earrings

For some of my own great DIY accessory projects check out my new book, "Handmade Chic: Fashionable Projects That Look High-End, Not Homespun".

- Laura


04
FRI

Laura Bennett DIY: Episode 2 – James' Swarovski-Inspired Shoes

Posted By CaitlinBergmann 4:04pm GMT

Oh, please. This one is so easy you can do it with your eyes closed. I am not crazy about this design (the color palette is way too eighties for me) but I love the idea that you can use these techniques to take a plain pair of shoes and make them your own. I used a pair of Christian Siriano for Payless pumps (on sale for $11!), but you can start with any pair you like.

Laura Bennett DIY shoes

Materials
Print out pattern pieces
Pair of plain peep toe pumps
Leather, suede, or fabric scraps
A variety of flat back rhinestones (www.m&jtrimmings.com) 3M 365 Adhesive Transfer Tape (Note: industrial strength double stick tape) (www.drillspot.com)
Masking tape
Clear glue (I used Beacon 527 Multi Use glue)
Thread

Tools

Sewing machine
Size 14 or 16 leather sewing machine needles
Scissors
Pen

1. Make a pattern to cover your shoe's heel, by covering the heel with overlapping pieces of masking tape. Trace the edges of the heel with a pen, Peel off the tape and trim along the pen lines. Use this pattern to trace and cut out a contrasting color of leather, suede or fabric.


2. To adhere the new heel color, cover the wrong side of the cut piece with adhesive transfer tape. Burnish and peel the paper backing. Carefully apply it to the heel of your shoe.


3. Using the pattern pieces provided, cut out two of each piece in your desired material (a single layer of the small triangular piece is sufficient). Using the adhesive transfer tape, adhere the matching pieces together. Topstitch 1/8" from the edge around each shape.


4. Mark the portions of the shapes that make contact with the shoe, apply the adhesive transfer tape to those areas, and apply the shapes to the shoe.


5. Apply the flat back rhinestones as desired using clear drying glue.



For some of my own great DIY accessory projects (including embellished shoes) , check out my new book, "Handmade Chic: Fashionable Projects That Look High-End, Not Homespun."

- Laura

ON TV